structural work, foam works, blockwork accessories
Structural Work, Foam Works, Blockwork Accessories
Structural Accessories
Heavy Rib Sheet
Heavy Rib is used widely in the construction work for joints, stop-end, retaining walls and columns. It creates a strong bond base
for successive pours. Heavy Rib is fixed as permanent formwork.
Heavy Rib provides a high degree of control over the
quality of the joint which is as strong in bond and shear as a well prepared scabbled joint.
Pullout Box-Hole and Pullout Box-Mesh
The Pullout Box is supplied in retainer boxes made from steel sheets, for the reliable transmission of shear forces. The Pullout Box is
designed to ensure the exact distance between rods, in which the holes are made slightly bigger than the rod diameter.
Material Thickness: 0.4mm – 1.5mm (SS / MS), 0.4mm – 2.0mm (GI) as standard.
Covers or Lids are available according to the requirements.
Note: All dimensions are in mm.
Maximum Length: 3000mm
Special width, height of flange, hole diameter & length are available upon request.
Puddle Flange
Puddle Flanges are in basic a very good product to save time cost and quality of construction. It can be used an any type of application where a pipeline has to cross any concrete structure like wall, slab, tank or any other typical application.
Column Shutter
Reinforced concrete column forms are subjected to lateral pressure because of their small cross section, large heights and relatively high rates of concrete placement. Thus It is necessary to provide tight joints and strong tie support to the formwork.
Foam Works
Angle Bead
Angle Beads help the formation
of corners and abutments
which are resistant to chips,
cracks and impact damage.
Protecting corners & edges
and giving better shape are
the main purposes.
Plaster Stop beads
Plaster Stop Beads are used for
the finishing and reinforcing of
plaster edges. They provide a
true straight line and protect the plaster where it is most vulnerable. They are available to suit various plaster depths.
Corner Lath
Corner Lath is a jointless mesh,
bent lengthwise in the center
and is used inside corner joints
with dissimilar material base.
Coil lath
Coil Lath is used for external wall to offer sturdiness to the structure.
Blockwork Accessories
Block work expanded mesh
Block Work Mesh is an anti-crack reinforcement mesh for non-structural use. Block Work reinforcement mesh should be used in every second course of a wall. Combinations of different widths of reinforcement mesh may be used to suit any wall thickness. It is
also recommended for window and doorframes for stress resistance.
Special lengths and widths are available upon request.
Block tie
Wall ties / Anchor plates are used to attach structural
members or equipment to concrete structure. Plates and
angles can also be used to frame openings in concrete
walls or as shelf angles. They are used with precast or cast
in place concrete.
Non – Standard sizes upon request.
Expanded Metal
Crimped heavy duty expanded metal is the most practical and economical way to ensure safety and structural strength. It acts as an effective preventative measure to secure internal and external walls, ceilings and roofs from intruders. It can be quickly installed by fasteners either by bolting or by welding. The knuckles and strands are set at a uniform angle to plane of sheet mesh. It allows free air circulation and distributes the load
on the metal to the supporting frames.
Steel Lintels and Lintel Brackets
Steel Channel Lintels provide open span support over door and window apertures providing light weight support and efficient load bearing for all types of block. All Lintels are manufactured using galvanized steel / stainless steel. Upon customer request,
steel lintels can be coated with black thermo set polyester powder or black dual-coat epoxy paint which provides excellent
long-term corrosion resistance.
